4.7" Wide, for waterproofing and vapor management when installing the WP 200 sheet membrane
For seams and changes of plane
Component of a waterproof/vapor-barrier membrane system
Easy to cut, adjust and install
Compatible with MAPEI polymer-modified mortars
Using a 1/4" x 3/16" (6 x 4,5 mm) V-notched trowel, key in the mortar to the adjoining seams with the trowel’s flat side, being sure to work the mortar into the membrane
Three layered product made of polypropylene / polyethylene
Total thickness: approx. 0.44-0.48 mm
Width: 12 cm / 4.7"
Laying tiles
After the application of the waterproofing membrane, it is possible to proceed directly with the installation of tiles.
The choice of the adhesive should be made according to the type and size of the selected ceramic tile or natural stone.
Must be cut to size before being bonded.
Use a MAPEI tile adhesive conforming to a minimum of class C2 according to EN 12004 or ISO 13007 (such as Keraquick S1, Ultralite S1, Keraflex, Keraflex Maxi S1 or similar) using a 3x3 or 4x4 mm notched trowel
Mapeflex MS45 must be applied around the perimeter of the drain in order to achieve an adequate seal to the junction.
Choosing a selection results in a full page refresh.
My Account
