Laticrete

Laticrete Hydro Ban 5" x 16'.5" Sealing Tape

SKU: 9455-0516-2
In stock
On backorder
$25.04 inc. VAT
Ready to install and finish the job!

All our products are professional-grade and backed by industry expertise. From precision tile cutters to complete waterproofing systems, unbox the quality you need to tackle your project with confidence.

Have Questions? Ask an expert

Email (239) 345-0165

Laticrete Hydro Ban 5" Wide x 16'5" Long Sealing Tape

Features

  • Sections of Hydro Ban sheet membrane should be butt-jointed and the seam between the sheet membrane sections should be covered with sealing tape
  • Make sure that the sealing tape overlaps each HYDRO BAN Sheet Membrane section by a minimum of 2" (5 cm)
  • The floor should be the last section installed. NOTE: Sections of sheet membrane may also be shingled (overlapped) during installation without the need for sealing tape
  • Treat the vertical corners with the sealing tape next in the same manner as the floor-to-wall transitions were installed. Overlap the corners by 2" (5 cm)
  • For any sections where two strips of sealing tape will be joined, be certain to overlap the material by 2" (5 cm)
  • Important, there should not be excessive overlapping. For example, at the corner, the HYDRO BAN Sealing Tape should overlap the HYDRO BAN Preformed Corner but not the adjacent HYDRO BAN Sealing Tape