Laticrete

Laticrete Latapoxy 310 Stone Adhesive Mini Jar Unit Part A & B

SKU: S-310AB-NC-08
In stock
On backorder
$49.40 inc. VAT
Ready to install and finish the job!

All our products are professional-grade and backed by industry expertise. From precision tile cutters to complete waterproofing systems, unbox the quality you need to tackle your project with confidence.

Have Questions? Ask an expert

Email (239) 345-0165

Laticrete Latapoxy 310 Stone Adhesive Mini Jar Unit, Part A & B, S-310AB-NC-08, 2 x 1/2 liter

Two component, high strength epoxy adhesive, which is formulated for spot bonding fixing method of tile and stone installations on vertical surfaces. Maintains its non-sag consistency at high temperatures up to 95°F (35°C).


Features

  • Best speed and productivity over mechanical anchoring, plaster and wire, and the thin-set method of veneer installation
  • Easier to work with when compared to traditional methods; no drilling, cutting of kerfs or setting of pins
  • LATAPOXY 310 Stone Adhesive allows for quick, easy plumb adjustment while stone is in place to compensate for uneven walls and stone thickness variations
  • Permanent; it will not fail or deteriorate over time and is ICC and IBC approved
  • 1 liter - 2 parts - 2 x 1/2 liter
  • Approximate Coverage per 10 Liter Unit: 300-325 ft2 (27-30 m2) at Plumb Wall (3 mm) with 1/8" Latapoxy Thickness (3 mm) *150-170 ft2 (14-16 m2) out 1/4" (6 mm) with 1/4" Latapoxy Thickness (6 mm). *75-80 ft2 (7-7.5 m2) out 1/2" (12 mm) with 1/2" Latapoxy Thickness (12 mm)

Uses

  • Spot bonding marble, granite and large format ceramic tile on walls and overheads, interior and exterior applications
  • Adhesive for bonding masonry, precast concrete and stone panels
  • Ideal for fireplace surrounds, elevators and stair risers
  • Adhesive for bedding and fastening marble, granite and other stone slabs on walls and wainscoting
  • Adhesive for fabricating granite, marble and other stone
  • Approved by TCNA for Interior applications method W215 and W260

Advantages

  • Fast Permanent Bond-45 minutes to 1 hour set time
  • Easy to Use-1:1 mixing ratio by volume
  • Non-Staining-ideal for white and light colored?marbles, other stones and tiles
  • Withstands shock and vibration
  • Durable Permanent Bond-will not deteriorate over time
  • Safe-no solvents
  • Non-Sag-when applied up to 1" (25 mm) thick
  • Approved by the following building code bodies for exterior installations: ICC and IBC

Interior Substrates

  • Concrete
  • Concrete masonry units (CMU)
  • Brick/masonry
  • Exterior glue plywood
  • Consult cement backer board manufacturer for specific installation recommendations
  • Steel surface must be cleaned to remove oil, dust oxidation and other bond inhibiting materials

Exterior Substrates

  • Please consult LATICRETE Technical Services at 800.243.4788, ext. 235 for approval prior to use for all exterior applications
  • There is a maximum height restriction of 30 ft (9.1 m)
  • For exterior installations outside of North America, contact the LATICRETE International Department at 1.800.243.4788, ext. 242

Concrete Application

  • Must be minimum 6" (150 mm) thick reinforced
  • Must be minimum 3500 psi (24 MPa)
  • Must be minimum 28 days old prior to installation
  • CMU
  • Double wythe walls only

    Laticrete Latapoxy 310 Stone Adhesive Mini Jar Unit, Part A & B, S-310AB-NC-08, 2 x 1/2 liter

    Two component, high strength epoxy adhesive, which is formulated for spot bonding fixing method of tile and stone installations on vertical surfaces. Maintains its non-sag consistency at high temperatures up to 95°F (35°C).


    Features

    • Best speed and productivity over mechanical anchoring, plaster and wire, and the thin-set method of veneer installation
    • Easier to work with when compared to traditional methods; no drilling, cutting of kerfs or setting of pins
    • LATAPOXY 310 Stone Adhesive allows for quick, easy plumb adjustment while stone is in place to compensate for uneven walls and stone thickness variations
    • Permanent; it will not fail or deteriorate over time and is ICC and IBC approved
    • 1 liter - 2 parts - 2 x 1/2 liter
    • Approximate Coverage per 10 Liter Unit: 300-325 ft2 (27-30 m2) at Plumb Wall (3 mm) with 1/8" Latapoxy Thickness (3 mm) *150-170 ft2 (14-16 m2) out 1/4" (6 mm) with 1/4" Latapoxy Thickness (6 mm). *75-80 ft2 (7-7.5 m2) out 1/2" (12 mm) with 1/2" Latapoxy Thickness (12 mm)

    Uses

    • Spot bonding marble, granite and large format ceramic tile on walls and overheads, interior and exterior applications
    • Adhesive for bonding masonry, precast concrete and stone panels
    • Ideal for fireplace surrounds, elevators and stair risers
    • Adhesive for bedding and fastening marble, granite and other stone slabs on walls and wainscoting
    • Adhesive for fabricating granite, marble and other stone
    • Approved by TCNA for Interior applications method W215 and W260

    Advantages

    • Fast Permanent Bond-45 minutes to 1 hour set time
    • Easy to Use-1:1 mixing ratio by volume
    • Non-Staining-ideal for white and light colored?marbles, other stones and tiles
    • Withstands shock and vibration
    • Durable Permanent Bond-will not deteriorate over time
    • Safe-no solvents
    • Non-Sag-when applied up to 1" (25 mm) thick
    • Approved by the following building code bodies for exterior installations: ICC and IBC

    Interior Substrates

    • Concrete
    • Concrete masonry units (CMU)
    • Brick/masonry
    • Exterior glue plywood
    • Consult cement backer board manufacturer for specific installation recommendations
    • Steel surface must be cleaned to remove oil, dust oxidation and other bond inhibiting materials

    Exterior Substrates

    • Please consult LATICRETE Technical Services at 800.243.4788, ext. 235 for approval prior to use for all exterior applications
    • There is a maximum height restriction of 30 ft (9.1 m)
    • For exterior installations outside of North America, contact the LATICRETE International Department at 1.800.243.4788, ext. 242

    Concrete Application

    • Must be minimum 6" (150 mm) thick reinforced
    • Must be minimum 3500 psi (24 MPa)
    • Must be minimum 28 days old prior to installation
    • CMU
    • Double wythe walls only

      Laticrete Latapoxy 310 Stone Adhesive Mini Jar Unit, Part A & B, S-310AB-NC-08, 2 x 1/2 liter

      Two component, high strength epoxy adhesive, which is formulated for spot bonding fixing method of tile and stone installations on vertical surfaces. Maintains its non-sag consistency at high temperatures up to 95°F (35°C).


      Features

      • Best speed and productivity over mechanical anchoring, plaster and wire, and the thin-set method of veneer installation
      • Easier to work with when compared to traditional methods; no drilling, cutting of kerfs or setting of pins
      • LATAPOXY 310 Stone Adhesive allows for quick, easy plumb adjustment while stone is in place to compensate for uneven walls and stone thickness variations
      • Permanent; it will not fail or deteriorate over time and is ICC and IBC approved
      • 1 liter - 2 parts - 2 x 1/2 liter
      • Approximate Coverage per 10 Liter Unit: 300-325 ft2 (27-30 m2) at Plumb Wall (3 mm) with 1/8" Latapoxy Thickness (3 mm) *150-170 ft2 (14-16 m2) out 1/4" (6 mm) with 1/4" Latapoxy Thickness (6 mm). *75-80 ft2 (7-7.5 m2) out 1/2" (12 mm) with 1/2" Latapoxy Thickness (12 mm)

      Uses

      • Spot bonding marble, granite and large format ceramic tile on walls and overheads, interior and exterior applications
      • Adhesive for bonding masonry, precast concrete and stone panels
      • Ideal for fireplace surrounds, elevators and stair risers
      • Adhesive for bedding and fastening marble, granite and other stone slabs on walls and wainscoting
      • Adhesive for fabricating granite, marble and other stone
      • Approved by TCNA for Interior applications method W215 and W260

      Advantages

      • Fast Permanent Bond-45 minutes to 1 hour set time
      • Easy to Use-1:1 mixing ratio by volume
      • Non-Staining-ideal for white and light colored?marbles, other stones and tiles
      • Withstands shock and vibration
      • Durable Permanent Bond-will not deteriorate over time
      • Safe-no solvents
      • Non-Sag-when applied up to 1" (25 mm) thick
      • Approved by the following building code bodies for exterior installations: ICC and IBC

      Interior Substrates

      • Concrete
      • Concrete masonry units (CMU)
      • Brick/masonry
      • Exterior glue plywood
      • Consult cement backer board manufacturer for specific installation recommendations
      • Steel surface must be cleaned to remove oil, dust oxidation and other bond inhibiting materials

      Exterior Substrates

      • Please consult LATICRETE Technical Services at 800.243.4788, ext. 235 for approval prior to use for all exterior applications
      • There is a maximum height restriction of 30 ft (9.1 m)
      • For exterior installations outside of North America, contact the LATICRETE International Department at 1.800.243.4788, ext. 242

      Concrete Application

      • Must be minimum 6" (150 mm) thick reinforced
      • Must be minimum 3500 psi (24 MPa)
      • Must be minimum 28 days old prior to installation
      • CMU
      • Double wythe walls only