TAVY Thin-Skin Tile Underlayment 100 Sq. ft. Roll

Add the classic touch of tile to any room!

Features

• Two Part Underlayment System was developed to provide an underlayment for tile that could be installed over any surface without adding additional height to the sub-floor
• The Thin-Skin System is so simple that it can be installed by both professionals and DIYers
• Can be used with either modified or non-modified thinset mortar

Benefits

• Tested by Tile Council of America
• No need to buy or install nails/screws
• Increase tiling applications by eliminating tear outs of existing surfaces
• Allows for tile or stone to be set on any surface
• Lightweight and easier to transport (less than 15 lbs. per 100 square feet) NO dusty mess to clean up
• NO additional height added to any surface as opposed to current underlayments
• NO waste, all TAVY Thin-Skin Underlayment pieces are usable regardless of size and shape
• 25% - 50% lower cost than other underlayments
• One roll of TAVY Thin-Skin Underlayment 2.5' X 40' and one gallon of TAVY Thin-Skin #007 Glue will cover 100 square feet
• Thin-Skin Underlayment is ideal for making templates for difficult cuts
• Minimize overall load weight
• Crack suppression up to 1/8" over concrete
• Can Not Be Used For Waterproofing

Steps to installing the TAVY THIN-SKIN Two-Part Tile Underlayment System

• 1. Clean the sub-surface of debris
• 2. Spread TAVY Thin-Skin #007 Glue
• 3. Install TAVY Thin-Skin Underlayment
• 4. Skim coat TAVY Thin-Skin Underlayment with mortar
• 5. Start setting tile!

TOOLS REQUIRED

• Pencil, knife or scissors, 5/32" v-notched trowel (minimum), 5/32" v-notched spatula, latex modified mortar, putty knife and margin trowel